Tanning Bed Equipment
Tanning bed equipment should be routinely cleaned and repaired to ensure correct operation of the tanning bed. Several of the first tanning bed equipment are described here.
Ultraviolet lamps or bulbs are the most momentous element of any tanning bed. Produced out of quartz, these bulbs emit a risk-free quantity of ultraviolet radiation, causing a longer-lasting tan. Some choices of tanning bulbs are accessible; Wolff, Cosmedico VHR, VLR, and 9K9, and Voltrac are many amongst all of them. You will be able to buy the lamps from tanning bed dealers. Prior to buying, make sure that the make, model, and look of the bulb matches the bed currently in utilizes. The life span of the lamp ought to also be verified. As an example, the Wolf Strategy Velocity sunlamps frequently last for 1000 hours.
Sometimes, UV radiations are emitted from the sides and back of the lamps. To avoid this, reflectors are used in tanning beds. Usually, they’re created of really polished aluminum and are shaped like a rounded “W”. Acrylic shields are used to avoid heat burns from the UV lamps. They let optimum volume of UV penetration. Nevertheless the transmissive property of the shield would be lost with age. So, they have to be replaced at the correct time. Acrylic shields could rate several hundred dollars or extra
The tanning beds also have internal cooling fans. These fans are installed to minimize the temperature of the tanning bed. With no all of them, the bed products get overheated and are rapidly worn out. Almost all of the tanning beds utilize 4? Axial fans, which operate on 110 volt or 220 volt. Many models utilize squirrel cage or carriage fans.
One other key component is the timer, which helps to limit the highest time per tanning session. Every single timer is set with a highest exposure time that depends on the sort of tanning products used. Commonly, the time extends up to 20 minutes. Right now, all tanning beds accessible in the U. S are equipped with timers. Depending on the FDA, all commercial tanning beds must have a timer with preset highest time.